{"id":1441,"date":"2024-03-12T14:58:39","date_gmt":"2024-03-12T14:58:39","guid":{"rendered":"https:\/\/outsidegr.com\/?p=1441"},"modified":"2024-03-12T14:58:39","modified_gmt":"2024-03-12T14:58:39","slug":"lawn-mower-ran-out-of-gas-wont-start","status":"publish","type":"post","link":"https:\/\/outsidegr.com\/lawn-mower-ran-out-of-gas-wont-start\/","title":{"rendered":"Lawn Mower Ran Out Of Gas Wont Start"},"content":{"rendered":"\n \n
If your lawn mower ran out of gas and won’t start, try adding fresh gas and trying again. A lawn mower can fail to start when it runs out of gas due to an airlock in the fuel lines.<\/strong><\/p>\n \n \n
This prevents the new fuel from reaching the engine. Additionally, choking the engine too much can flood it. Letting the mower air for a while and then restarting without the choke, gradually adding choke if needed, can help. However, running out of gas is generally not harmful to the mower itself, although it can cause the engine to stall. <\/p>\n \n \n
To troubleshoot, tap the carburetor to aid the flow of gas. If the issue persists, a new fuel filter might be necessary.<\/p>\n \n \n
Troubleshooting A Lawn Mower That Won’t Start After Running Out Of Gas<\/h2>\n \n
If you’ve run out of gas while mowing your lawn and now your mower won’t start, don’t worry – you’re not alone. This is a common issue that can happen when the engine gets flooded after running out of fuel. In this guide, we will walk you through the steps to troubleshoot and fix the problem, so you can get back to mowing your lawn in no time.<\/p>
Inspecting The Mower<\/h3>
The first step in troubleshooting a lawn mower that won’t start after running out of gas is to inspect the mower for any visible issues. Check for any loose or damaged parts, such as loose wires or disconnected fuel lines. Inspect the air filter to make sure it’s clean and not clogged with debris. Additionally, examine the blades to ensure they are not dull or damaged.<\/p>
Checking The Gas In The Tank<\/h3>
Before moving on to more advanced troubleshooting steps, it’s important to check the gas level in the tank. Ensure that there is enough fuel in the tank to power the engine. If the tank is empty, fill it up with fresh gasoline. If there is gas in the tank, you can proceed to the next step.<\/p>
Checking Compression<\/h3>
Compression is crucial for the engine to start and run smoothly. To check the compression, remove the spark plug and insert a compression tester into the spark plug hole. Pull the starter rope a few times to measure the compression reading. If the compression is low, it may indicate a problem with the piston rings or valves, and further inspection may be necessary.<\/p>
Removing And Inspecting The Spark Plug<\/h3>
The spark plug plays a crucial role in igniting the fuel-air mixture in the engine. Over time, spark plugs can become dirty or worn out, preventing the engine from starting. Remove the spark plug and inspect it for any signs of wear, such as fouling or corrosion. If the spark plug is damaged, replace it with a new one and retry starting the mower.<\/p>
Investigating Possible Causes<\/h3>
If the mower still won’t start after inspecting the above components, it’s time to investigate further. Potential causes could include a clogged fuel line or carburetor, a malfunctioning ignition system, or a faulty fuel pump. Carefully inspect these components for any signs of damage or blockage. Clean or replace any parts that appear to be causing the issue.<\/p>
By following these troubleshooting steps, you should be able to pinpoint the cause of your lawn mower’s starting issue. Remember to always prioritize safety and consult the manufacturer’s instructions for your specific mower model. With a little patience and some basic maintenance, you’ll have your mower up and running again in no time.<\/p>\n