If your snowblower won’t start after sitting all summer, it’s likely due to stale gasoline, causing varnish and gum to clog the carburetor. To resolve this, consider draining the old gas, using a fuel stabilizer, checking the ignition system, and replacing the spark plug.
Additionally, ensure the fuel lines are undamaged, and don’t wait until the first storm to prepare your snowblower for use. When snowblowers fail to start after the summer, it’s often due to stale fuel that causes carburetor clogging. This issue can lead to varnish and gum formation, obstructing the fuel delivery system.
To rectify this problem, consider performing a thorough inspection and maintenance of your snowblower before the arrival of the first snowstorm. This may involve draining old gas, using a fuel stabilizer, and checking the ignition system and spark plug. Taking these steps will ensure your snowblower is ready to tackle the upcoming winter season.
Credit: blog.amsoil.com
Common Causes For Snowblower Not Starting After Summer
When a snowblower won’t start after summer, it’s often caused by stale gasoline leading to carburetor clogs. The fuel deteriorates over time, creating varnish that can block passages and affect the carburetor’s float. Regular maintenance and fuel stabilization can prevent this issue.
Fuel Delivery Problems
If your snowblower refuses to start after a long summer hiatus, one of the most common reasons could be fuel delivery problems. When your snowblower sits in the garage unused for months, the gasoline in the tank begins to break down. This breakdown process forms varnish and gum that can clog the tiny passages or stick the float in the carburetor, preventing fuel from reaching the engine. When this happens, you’ll need to address the fuel delivery issue to get your snowblower up and running again.Gasoline Breakdown
Gasoline breakdown is a direct result of storing your snowblower for an extended period, such as over the summer. Over time, the fuel becomes stale and loses its effectiveness. The breakdown process creates varnish and gum that block the fuel system, preventing the snowblower from starting. To prevent this issue, it is advisable to drain the fuel tank or mix in a fuel stabilizer before storing your snowblower. By taking these precautions, you can avoid gasoline breakdown and ensure your snowblower starts smoothly when winter arrives.Spark Plug Issues
Another common cause for a snowblower not starting after the summer is spark plug issues. Over time, spark plugs can become fouled or worn out, making it difficult for them to generate the spark needed to ignite the fuel-air mixture. If the spark plug is faulty, the snowblower engine will struggle to start. Therefore, it is essential to inspect the spark plug and replace it if necessary. By doing so, you can ensure a strong spark and improve the chances of your snowblower starting effortlessly when you need it. In conclusion, several factors can contribute to a snowblower not starting after spending the summer in storage. Fuel delivery problems, gasoline breakdown, and spark plug issues are among the most common culprits. By addressing these issues and taking the necessary preventative measures, such as using a fuel stabilizer and inspecting the spark plug, you can increase the likelihood of your snowblower starting without any trouble in the winter season.
Credit: www.bobvila.com
Steps To Start A Snowblower That’s Been Sitting
When the winter season approaches, the last thing you want to deal with is a snowblower that refuses to start after sitting idle throughout the summer. However, with the proper steps and maintenance, you can easily tackle this common issue and ensure your snowblower is ready to take on the snow. Below, we will discuss some essential steps to start a snowblower that has been sitting.
Preparation
If your snowblower has been sitting for an extended period, it’s crucial to prepare it before attempting to start it. Begin by checking the condition of the fuel and fuel lines, as well as replacing the spark plug if necessary. Additionally, proper storage tips should be followed to prevent similar issues in the future.
Checking Fuel And Fuel Lines
The first step to starting a snowblower is to ensure that the fuel and fuel lines are in good condition. Stale gas can lead to varnish and gum formation, which can clog the passages in the carburetor. Inspect the gas and fuel lines for any damage or blockages and address any issues before proceeding.
Replacing Spark Plug
A worn or faulty spark plug can prevent the snowblower from starting. If the spark plug shows signs of wear or damage, it should be replaced with a new one. This simple maintenance task can make a significant difference in the performance of the snowblower.
Proper Storage Tips
To prevent similar starting issues in the future, it’s essential to follow proper storage tips for your snowblower. This includes using a fuel stabilizer to keep the fuel fresh and prevent the carburetor from gumming and varnishing. Additionally, the snowblower should be properly stored to protect it from external elements and ensure it starts up smoothly when needed.
Troubleshooting Snow Blower Not Starting
If your snowblower won’t start after summer, it’s likely due to a fuel delivery problem caused by stale gas. The gasoline breaks down over time, creating varnish and gum that can clog the carburetor. To fix this, try using fresh treated fuel or consider adding a fuel stabilizer to prevent future issues.
Don’t forget to check the spark plug and fuel lines for damage as well.
Clogged Carburetor
If your snow blower is not starting after the summer, the clogged carburetor could be the culprit. Due to the breakdown of gasoline, varnish and gum may have formed, clogging the tiny passages or sticking the float in the carburetor. To troubleshoot, you can clean the carburetor using a carburetor cleaner or a small wire to clear the passages.
Using Fuel Stabilizer
Using a fuel stabilizer can prevent fuel from breaking down and causing gumming or varnishing of the carburetor. It’s important to use a high-quality fuel stabilizer to keep the fuel fresh, especially during long periods of snow blower inactivity.
Checking Ignition System
If the snow blower is still not starting, it’s essential to check the ignition system using a spark tester. Ensure that the spark plug wire is securely connected and not damaged. Testing the ignition system will help identify if there is a problem with sparking, a crucial factor in starting the snow blower.
Inspecting Spark Plug
Inspecting the spark plug is a vital step in troubleshooting a snow blower not starting. To ensure proper functioning, examine the spark plug for any signs of wear, such as fouling or damage. If necessary, replace the spark plug with a compatible one and reconnect the spark plug wire securely.
Maintenance Tips For Summer Snowblower Storage
As the summer months roll around, it’s time to bid farewell to the snow and put your snowblower into storage. However, when winter comes knocking again, you may find yourself faced with a snowblower that refuses to start. This frustrating situation can be easily avoided by following some simple maintenance tips for summer snowblower storage.
Draining Fuel Or Adding Stabilizer
One of the key steps in preparing your snowblower for summer storage is to address the fuel in the tank. Fuel left sitting for months can break down, leading to varnish and gum that clogs the carburetor. To prevent this issue, you have two options: draining the fuel completely or adding a fuel stabilizer.
- Draining Fuel: If you choose to drain the fuel, start by running the snowblower until it runs out of gas. This helps ensure that there is no residual fuel left in the system. Remember to perform this task outdoors in a well-ventilated area.
- Adding Stabilizer: Alternatively, you can add a fuel stabilizer to the tank. This prevents the fuel from oxidizing and causing issues. Be sure to follow the manufacturer’s instructions for the correct amount of stabilizer to use.
Avoiding Fuel Oxidation
Fuel oxidation is a common problem during summer storage. When fuel oxidizes, it forms a sludge that can clog the fuel system and prevent the snowblower from starting. To avoid this, there are a few steps you can take:
- Use Fresh Fuel: Be sure to use fresh fuel in your snowblower before storing it for the summer. This helps minimize oxidation.
- Run the Snowblower: Running the snowblower for a few minutes every month during the summer can help prevent the fuel from oxidizing. This keeps the fuel moving through the system and reduces the risk of clogs.
Proper Storage Techniques
In addition to addressing the fuel, there are several other storage techniques you can employ to ensure your snowblower starts up smoothly when winter arrives:
- Clean the Snowblower: Before storing, clean any debris, snow, or ice from the snowblower. This helps prevent rust and keeps the machine in good working condition.
- Store in a Dry Location: Find a dry and well-ventilated area to store your snowblower. Moisture can damage the machine and its components.
- Protect the Engine: Consider covering the engine with a dust cover or plastic bag to keep dust and debris out.
- Check for Damage: Inspect the snowblower for any signs of damage. Look for loose or worn parts and address them before storing.
By following these maintenance tips for summer snowblower storage, you can ensure that your machine is ready to tackle the snow when winter returns. Taking a little extra time now can save you from the frustration of a snowblower that refuses to start.
Final Steps To Fix A Snowblower That Won’t Start
If your snowblower won’t start after sitting all summer, the most common issue is stale gas causing a clogged carburetor. You can troubleshoot by checking the fuel system, replacing the spark plug, and ensuring proper fuel storage next time. Keep your snowblower running smoothly with these final steps.
[if lte IE 9]>Final Steps to Fix a Snowblower That Won’t Start
<![endif]Using Starting Fluid
<![endif][if lte IE 9]>Using Starting Fluid
<![endif]If snowblower won’t crank, try using starting fluid.
Checking Spark For Cracks
Check for spark plug cracks to ensure proper function.
Cleaning The Carburetor
Clean the carburetor to remove any blockages for smooth operation.
Credit: m.youtube.com
Frequently Asked Questions On Snowblower Not Starting After Summer
Why Won T My Snowblower Start After Sitting All Summer?
When snowblowers sit for a long time, old gas can cause fuel delivery problems. Stale gas can clog the carburetor. Use fuel stabilizer to prevent this. Check the ignition system and replace the spark plug if needed. Always follow manufacturer’s recommendations for storing your snowblower.
How Do You Start A Snowblower After Summer?
To start a snowblower after summer, follow these steps: 1. Don’t wait for the first snowstorm. 2. Ensure safety precautions. 3. Check gas and inspect fuel lines. 4. Replace the spark plug. 5. Store the snowblower properly for next year.
What Is The Most Common Reason Snowblower Won’t Start?
A common reason a snowblower won’t start is a clogged carburetor due to stale gas buildup. Prevent this by using a fuel stabilizer to keep the fuel fresh.
Conclusion
If your snowblower is not starting after summer, the most common cause is a fuel delivery problem. Over time, the gasoline in the snowblower can break down and form varnish and gum, which can clog the carburetor or stick the float.
To fix this issue, you can use a fuel stabilizer to keep the fuel fresh and prevent the carburetor from gumming up. Additionally, you should replace the spark plug and check the ignition system. Remember to store your snowblower properly for the next summer to avoid similar problems in the future.
