Snowblower Auger Stops When Hits Snow


When a snowblower auger stops when hitting snow, it indicates a potential issue with the auger belt or shear pins. This can impede the rotation of the auger, preventing it from effectively clearing snow.

A snowblower is a crucial tool for efficiently clearing snow from driveways and walkways. However, if the auger stops functioning when encountering snow, it can be frustrating and hinder the snow clearing process. To resolve this issue, it is essential to inspect the auger belt and shear pins for any signs of wear or damage.

Additionally, checking and adjusting the tension of the belt and replacing worn shear pins can help ensure the smooth functioning of the snowblower auger. Understanding and addressing these common issues can help maintain the optimal performance of the snowblower, ensuring reliable snow clearing during winter months.

Snowblower Auger Stops When Hits Snow

Credit: www.snowblowerforum.com

Common Causes Of Snowblower Auger Stopping When It Hits Snow

Snowblower auger stopping when it hits snow can be caused by a damaged belt or worn-out V-belt. If the belt is stretched, broken, or worn, the auger won’t rotate properly. Inspecting the belt for signs of wear and replacing it if necessary is crucial to ensure smooth functioning.

Common Causes of Snowblower Auger Stopping When It Hits Snow

Damaged Auger Belt

A damaged auger belt can cause the snowblower auger to stop when it hits snow. If the belt is worn, stretched, or broken, the auger won’t rotate properly. Inspect the belt for any signs of wear or damage and replace it if necessary.

Worn Or Broken Shear Pins

Worn or broken shear pins can also lead to the auger stopping when it encounters snow. These pins are designed to break under excessive pressure to prevent damage to the auger system. Check the shear pins regularly and replace them if needed to ensure smooth operation.

Seized Auger Bearings

If the auger bearings are seized, it can cause the auger to come to a halt when hitting snow. Inspect the bearings for any signs of rust or damage, and lubricate or replace them as necessary to prevent further issues.

Snowblower Auger Stops When Hits Snow

Credit: www.cubcadet.com

Troubleshooting Steps For Snowblower Auger Issues

Snowblowers are essential for clearing snow effectively, but sometimes issues can arise with the auger. When the snowblower auger stops working or becomes sluggish, it’s important to troubleshoot the problem to ensure smooth operation during snow removal. Here are some crucial troubleshooting steps for addressing common snowblower auger issues.

Checking The Auger Belt

The auger belt is a critical component that drives the auger when engaged by the pulley. If the belt is worn, stretched, or broken, the auger will not rotate properly, causing snow removal difficulties. To troubleshoot, inspect the belt for any signs of wear or damage. If necessary, replace the belt with a new one to ensure efficient operation.

Inspecting And Replacing Shear Pins

Shear pins play a vital role in protecting the auger and gearbox from damage when the auger encounters heavy snow or debris. Check the shear pins for any signs of breakage or damage, and replace them if necessary to maintain the proper functioning of the auger.

Addressing Seized Auger Bearings

Seized auger bearings can significantly impact the performance of the snowblower. Inspect the auger bearings for any signs of seizing or lack of lubrication. Address any issues by lubricating or replacing the bearings as needed to ensure smooth and efficient auger operation.

Why Snowblower Wheels Stop Turning When It Hits Snow

Snowblower wheels can stop turning when it hits snow due to various mechanical issues related to belt wear or misadjustment. These issues can hinder the smooth functioning of the snowblower, leading to decreased efficiency in clearing snow. Understanding common problems such as worn or broken v-belts and misadjusted belt tension can help in diagnosing and resolving the snowblower wheel stopping issue.

Worn Or Broken V-belt

If a snowblower’s v-belt is worn, it can lead to the wheels not turning when they hit snow. An examination of the v-belt for signs of wear or damage is crucial. If wear or damage is apparent, replacing the v-belt with a new one is necessary to restore the proper functioning of the snowblower.

Misadjusted Belt Tension

Misadjusted belt tension is another common issue leading to snowblower wheels not turning when coming into contact with snow. Ensuring the belt tension is correctly adjusted is imperative for smooth operation. Proper adjustment can prevent unnecessary strain on the snowblower’s components, allowing it to effectively tackle snow accumulation without interruption.

Regular maintenance and prompt resolution of belt-related issues can prevent snowblower wheels from stopping when encountering snow, ensuring optimal performance in removing snow effectively and efficiently.

Snowblower Auger Stops When Hits Snow

Credit: www.amazon.com

Solutions For Snowblower Wheels Not Engaging

Inspecting And Replacing The V-belt

If the V-belt is worn out or broken, the snowblower wheels won’t engage. Inspect the belt for wear and damage, and replace it if necessary.

Adjusting Belt Tension

To ensure proper engagement, adjust the tension of the belt. Make sure it is snug on the pulleys for optimal performance.

Possible Reasons For Snowblower Auger Working But Not Throwing Snow

When a snowblower auger stops throwing snow but continues working upon contact, it could be due to a worn or damaged auger drive belt. A stretched or damaged belt may not spin the auger fast enough to eject the snow properly.

Inspecting and replacing the belt as needed can resolve this issue.

Worn Or Stretched Auger Drive Belt

If your snowblower auger is working but not throwing snow, one possible reason could be a worn or stretched auger drive belt. The auger drive belt is responsible for spinning the auger fast enough to throw the snow off the pavement and out through the chute. When the belt becomes worn, stretched, or broken, it can’t provide enough power to the auger, resulting in a lack of snow throwing capability. To determine if the auger drive belt is the issue, inspect it for any signs of wear or damage. If you notice any issues, it’s important to replace the belt with a new one.

Improper Cable Adjustment

Another possible reason for the snowblower auger working but not throwing snow is improper cable adjustment. The auger drive cable plays a crucial role in keeping the belt snug on the pulleys, ensuring optimal performance. If the cable is not properly adjusted, it can cause the belt to be loose, leading to a reduction in the auger’s spinning speed and snow throwing capability. To address this issue, check the auger drive cable and make sure it is properly adjusted to maintain tension on the belt. By making the necessary adjustments, you can ensure that the auger drive belt functions effectively and allows the snowblower to throw snow as intended.

When troubleshooting issues with your snowblower auger not throwing snow, it’s essential to consider these possible reasons. By examining the condition of the auger drive belt and ensuring the cable adjustment is correct, you can resolve the problem and get your snowblower back to effectively clearing snow. Remember to inspect and replace any worn or damaged parts, and make the necessary adjustments for optimal performance.

Frequently Asked Questions For Snowblower Auger Stops When Hits Snow

Why Does My Snowblower Auger Stop When It Hits Snow?

When the snowblower’s auger stops in snow, check the drive belt for wear or damage. Replace it if necessary. Adjust or replace the auger drive cable if needed.

Why Do Snowblower Wheels Stop Turning When It Hits Snow?

When snowblower wheels stop turning in snow, it could be due to a worn-out or broken V-belt. Check and replace the belt if necessary.

Why Is My Snowblower Auger Working But Not Throwing Snow?

Check chute for obstructions, shear pins, auger belt, and engagement cable for issues. Inspect for wear or damage and replace parts as needed.

Conclusion

If your snowblower auger stops when hitting snow, check and replace worn or broken parts promptly to ensure smooth operation and efficient snow removal. Regular maintenance and timely repairs will keep your snowblower in top condition throughout the winter season.

Keep your equipment functioning flawlessly for hassle-free snow clearing.


Recent Posts